Raymarine forum / Raymarine Forums / Autopilots v / [CA] ST6001+ Replacement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] ST6001+ Replacement
03-14-18, 12:44 PM (This post was last modified: 03-14-18 04:18 PM by Chuck - Raymarine - Moderator.)
Post: #1
mcnairjw Offline
Junior Member
**
 		Posts: 3
Joined: May 2016
Reputation: 0
[CA] ST6001+ Replacement
What would be the recommendation(s) to replace a functional but display-compromised ST6001+ AND a non-functional ST600R wired remote (both unreparable per factory service). System configuration and compatibility requirements are Type 400 course computer, ST60 instruments, and Brookhouse Multiplexer integrating above via Sea Talk and NMEA 0183 with GPS, VHF/AIS, and PC navigation. To include any STng bridging requirements.
Find all posts by this user
Quote this message in a reply
03-14-18, 03:52 PM (This post was last modified: 03-14-18 04:18 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] ST6001+ Replacement
Welcome to the Raymarine Forum mcnairjw,

A p70S or p70RS Autopilot Control Head may be substituted for the ST6001+. Please click here to view a FAQ addressing this subject. A SmartController or S100 would be recommended as a wireless remote for the autopilot.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication