Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Water Temperature Source

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Water Temperature Source
05-30-18, 04:43 PM (This post was last modified: 05-31-18 10:29 AM by Chuck - Raymarine - Moderator.)
Post: #1
svalvasori Offline
Junior Member
**
 		Posts: 9
Joined: Mar 2018
Reputation: 0
[CA11] Water Temperature Source
I do not see a way to select water temperature source in Lighthouse 3. Am I missing something? I have older ST60 tridata that has taken over as the data source for water temperature. This temperature is incorrect and out of the adjustment range so I would like to disregard it and use the MFD transducer as the source.
Find all posts by this user
Quote this message in a reply
05-31-18, 10:33 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Water Temperature Source
Welcome to the Raymarine Forum svalvasori,

Unfortunately, the Data Sources feature of LightHouse 3 and LightHouse 2 software does not support source selection for water temperature. Please click here to view a FAQ addressing the LightHouse II / LightHouse 3 prioritization used in conjunction with water temperature.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication