Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 9 Display only. Will it display sonar from network?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 Display only. Will it display sonar from network?
06-01-18, 03:13 PM (This post was last modified: 06-01-18 03:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
jcdjcd Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2018
Reputation: 0
[CA11] Axiom 9 Display only. Will it display sonar from network?
I have a Axiom Pro 12 with Single Chirp Sonar. I networked in a Axiom 9 display only. When i select Sonar on the 9, it shows the depth, but no sonar. Should it be able to show the sonar?
Find all posts by this user
Quote this message in a reply
06-01-18, 03:34 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 9 Display only. Will it display sonar from network?
Welcome to the Raymarine Forum jcdjcd,

Please note that fishfinder sonar, radar, cartography, camera video, SiriusXM Satellite weather, and thermal camera resources are not shared via a NMEA 2000 communications network. Such sharing requires that the MFDs be operating with the same version of software and be interfaced to one another via an Ethernet communications network.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication