Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] Connect S2000 to es78

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Connect S2000 to es78
06-12-18, 09:05 PM (This post was last modified: 06-13-18 10:09 AM by Derek - Raymarine - Moderator.)
Post: #1
gacoogan Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2016
Reputation: 0
[DG] Connect S2000 to es78
Hi,

I want to connect my S2000 autopilot to my es78 MFD. I assume the right way to do that is with sea talk. Is that a supported configuration and if so, what cables do I need to do that?

Greg
Find all posts by this user
Quote this message in a reply
06-13-18, 10:14 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG] Connect S2000 to es78
Hi Greg,

If you are referring to the ST2000 Tiller pilot, this can be connected to the AXIOM display through the SeaTalk to STng converter, this link here describes the general process.

The Converter kit E22158 contains most of the cables, you will need one additional cable the A06075 which connects the AXIOM to the Converter spur connection.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication