Raymarine forum / Raymarine Forums / Autopilots v / [TG] P70/ EV1 heading sensor & ACU update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] P70/ EV1 heading sensor & ACU update
07-09-18, 05:09 PM (This post was last modified: 07-19-18 01:53 AM by Tom - Raymarine - Moderator.)
Post: #1
solomon Offline
Junior Member
**
 		Posts: 16
Joined: Mar 2016
Reputation: 0
P70/ EV1 heading sensor & ACU update
Good Afternoon,
P70/ EV1 heading sensor & ACU
I am looking to see if there is another method to update the above units to the latest software version without going through an outdated mfd? I am stuck with a C120 Classic which affords me with no option to update my A/P according to the directions. If there is a workaround for this I would be very happy ;)
Chris
Find all posts by this user
Quote this message in a reply
07-19-18, 01:56 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: P70/ EV1 heading sensor & ACU update
Sorry Chris, it's not possible to update those pilot components from a C-Classic because it has no support for STNG (it has a minimally-functional, very early NMEA2000-ish 'Seatalk2' port, but no software support for upgrading SeatalkNG products.)

I think you'll need to beg/borrow/steal a newer display or ask your local Raymarine technical dealer to do the upgrade for you.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication