[TG] [TG11] ST50 wind to NMEA 2000

[laurentdubois]

Hello,

I am planning to integrate an old ST50 wind instrument into my NMEA 2000 network and need confirm my understanding after reading this sticky thread (http://forum.raymarine.com/showthread.php?tid=229)

Can I directly interface the ST50 instrument seatalk cable connection with a device like the actisense NGW-1 ISO (stripping the seatalk cable and using a terminal block to connect both ends)?

Thanks

[Tom - Raymarine - Moderator]

Hello Laurent,

ST50 instruments talk Seatalk (Raymarine-proprietary), whereas the NGW-1 talks NMEA0183 and NMEA2000. NMEA0183 and Seatalk are very different - an NGW-1 won't talk Seatalk, don't try it or you could perhaps damage the NGW-1. Seatalk is not just 0183 under another name.

You need a Raymarine Seatalk1-SeatalkNG convertor, part E22158, to convert ST50 to NMEA2000/STNG.

Regards,
Tom

[laurentdubois]

Thanks Tom!

[Tom - Raymarine - Moderator]

No problem.
Tom