Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom
08-01-18, 02:25 AM (This post was last modified: 08-02-18 11:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
Bonnaud Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
[CA11] Axiom
Bonjour , j ai un axiom 9 rv , le lecteur de carte ne m affiche pas les cercles de distance ( carte navionics + ) , y a t il une manipulation à faire ?
Find all posts by this user
Quote this message in a reply
08-02-18, 11:56 AM (This post was last modified: 08-02-18 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom
Welcome to the Raymarine Forum Bonnaud,

Q. Hello, I have an axiom 9 rv, the card reader does not display the circles of distance (navionics + card), is there any manipulation to do?
A. When operating the MFD with LightHouse 3 v3.6.32 or later software, the Chart application's Range Rings feature may be configured ON/OFF via the command sequence MENU->SETTINGS->LAYERS->RANGE RINGS.

ors de l'utilisation du MFD avec le logiciel LightHouse 3 v3.6.32 ou ultérieur, la fonction d'anneaux de portée de l'application graphique peut être configurée ON / OFF via la séquence de commandes MENU-> SETTINGS-> LAYERS-> RANGE RINGS.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication