Analog CAM200 connection to e125 or e127

[Robinsonh2o]

What cable do I need to connect an analog CAM200 to one of the new 12 inch e-series MFDs?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Robinsonh2o,

Raymarine does not offer a version of the CAM200IP having an analog video interface. The CAM200IP is designed to be interfaced a POE Injector (supplies it with power), which is in turn designed to be interfaced to Ethernet Network port of an a/c/e/eS-Series MFD or HS5 RayNet Network Switch via via an appropriate length of RayNet (F) to RJ45 Cable. Raymarine's gS-Series MFDs feature POE Network sockets permitting the CAM200 IP to be directly mated to and powered by the gS-Series MFD's Network sockets. Raymarine Ethernet networking components may be found here.

Should you be seeking information concerning how a CAM50 or CAM100 may be interfaced to an a/c/e/eS/gS-Series MFD, the camera will be interfaced to power and to the analog video input connector of the MFD Power/NMEA 0183/Video Input Cable. Extension cables for the CAM50 and CAM100IP may be found here.