Raymarine forum / Raymarine Forums / Instruments v / Haxy ST60 display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Haxy ST60 display
09-14-18, 10:03 AM
Post: #1
Lew Springer Offline
Junior Member
**
 		Posts: 26
Joined: Feb 2016
Reputation: 0
Haxy ST60 display
I have two ST60 GRAPHIC displays that have a hazy cast over the center of the display. I disassembled the display to attempt to clean the back of the screen but it was clear. What is the cause of the haze? Is it correctable? A photo is attached.
Find all posts by this user
Quote this message in a reply
09-14-18, 10:26 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Haxy ST60 display
Welcome back to the Raymarine Forum Lew,

Unfortunately, the pictured symptom is that of a LCD which is failing. Unfortunately, Raymarine's Product Repair Center can no longer service ST60/ST60+ instruments. You may want to consider replacing this instrument with an i70S Multifunction Instrument Display (MFID). The i70/i70S MFDs may either be installed to support SeaTalk communications or to support SeaTalkng / NMEA 2000 communications.
Find all posts by this user
Quote this message in a reply
09-14-18, 09:26 PM (This post was last modified: 09-17-18 11:39 AM by Chuck - Raymarine - Moderator.)
Post: #3
Lew Springer Offline
Junior Member
**
 		Posts: 26
Joined: Feb 2016
Reputation: 0
RE: Haxy ST60 display
I'm sorry the news is not better, but thanks for the reply.
Find all posts by this user
Quote this message in a reply
09-17-18, 11:39 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Haxy ST60 display
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication