Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 9: Drain wire terminal screw size?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9: Drain wire terminal screw size?
01-31-19, 04:19 PM (This post was last modified: 02-01-19 10:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
paler Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2018
Reputation: 0
[CA11] Axiom 9: Drain wire terminal screw size?
What is the correct size and TPI for the drain wire terminal screw on an Axiom 9?

I have lost mine ...
Find all posts by this user
Quote this message in a reply
02-01-19, 10:54 AM (This post was last modified: 02-01-19 02:25 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 9: Drain wire terminal screw size?
Welcome to the Raymarine Forum paler,

The threaded insert feature metric M3 threads and will accommodate a screw up to 6mm long.
Find all posts by this user
Quote this message in a reply
02-01-19, 11:49 AM (This post was last modified: 02-01-19 02:00 PM by Chuck - Raymarine - Moderator.)
Post: #3
paler Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2018
Reputation: 0
RE: [CA11] Axiom 9: Drain wire terminal screw size?
Thank you sir, would you know the correct screw length or the the threded instert´s depth?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication