[CA] [CA11] Thermal Camera Monitor

[tegarre]

I have an installed E120 MFD with RayStar 125 gps for navigation. I plan to add a Thermal Camera T200 and want to have an additional monitor to display the T200 image. Can you recommend a monitor?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum tegarre,

Please note that E-Series Classic MFDs are not designed to control or configure thermal cameras. The first Raymarine MFD design to offer such capability was the E-Series Widescreen MFDs. Accordingly, the T200 thermal camera will not be interfaced via Ethernet (SeaTalkhs) to the MFD. The T200 would need to be interfaced via Ethernet to a Raymarine Joystick Control Unit (JCU). However, the NTSC/PAL video output of the T200 may be interfaced to the Video Input Cable supplied with the E-Series Classic MFDs to permit viewing of the thermal imagery video from the T200. If seeking a monitor, for the T200, one featuring support for NTSC/PAL video input would be required.