Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Element

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Element
03-06-19, 01:44 PM (This post was last modified: 03-06-19 03:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
eldora Offline
Junior Member
**
 		Posts: 3
Joined: Oct 2016
Reputation: 0
[CA11] Element
Can you set way points by moving the cursor to an object on the screen? If so, does it work on all views?
Find all posts by this user
Quote this message in a reply
03-06-19, 03:14 PM (This post was last modified: 03-06-19 03:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Element
Welcome to the Raymarine Forum eldora,

Q1. Can you set way points by moving the cursor to an object on the screen?
A1. Creating a waypoint at a cursor position on the screen is as simple using the trackpad to position the cursor and then pressing the Element's WPT (waypoint) button. More detail concerning this create waypoint at cursor feature may be found within the Cursor Mode section of Chapter 7.1: Chart app overview of the LightHouse Sport (Version 3.8xx) Advanced Operating Instructions.

Q2. If so, does it work on all views?
A2. Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication