[CA] [CA11] Axiom Pro RVX transducer question

[26fsregcc]

Hi, I am wondering if I can pair a B175M (model# 17834755) and a RV-200 (model# 18219279) with my 9" axiom pro RVX. Will these transducers play nice with my MFD or will I need extra components or cabling? Could you please confirm the model numbers are correct? They are off the west marine website. Thank you!
-Pat

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Pat,

The correct Raymarine part numbers for the RV-200 transducers are: A80465 (0°), T70318 RV-212 (12° tilted element pair), and T70319 RV-220 (20° tilted element pair). The correct Raymarine part numbers for the B175M transducers are A80043 (0°), A80046 (12° tilted element), and A80049 (20° tilted element). Use a single B175 with the necessary Single Operation Cable (A80328). Tilted Element RealVison transducer pairs and Tilted Element CHIRP are designed to be installed on hulls featuring deadrise. RealVision 3D transducers with 12° internal offset to accommodate hull deadrise angles from 6° to 18°. RealVision 3D transducers with 20° internal offset to accommodate hull deadrise angles from 14° to 26°. The B175M 12° tilted element accommodate hull deadrise angles from 8° to 15°. The B175M 20° tilted element accommodate hull deadrise angles from 16° to 24°.

The RV Transducer's Cable will plug into the RealVision Transducer socket on the back side of the Axiom Pro RVX MFD. Similarly, the 1kW CHIRP transducer Adapter Cable listed above will plug into the Axiom Pro RVX MFD's 1kW Transducer socket. These same part numbers may be found on West Marine's website.