Raymarine forum / Raymarine Forums / Radar v / Radar -- no data source followed by operation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar -- no data source followed by operation
05-20-16, 01:44 PM
Post: #11
Steve - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 318
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
No, the ST60 instrument and the GPS are on different interfaces, Seatalk 1 and possibly NMEA 0183.

You can look at the back of your E120 Classic and see if anything is connected to the Seatalk HS port. With what you have explained so far, it should be unused.
Find all posts by this user
Quote this message in a reply
05-21-16, 03:55 AM (This post was last modified: 05-25-16 03:48 PM by Chuck - Raymarine - Moderator.)
Post: #12
michaellutz Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
I did look and there is indeed something connected to that port. It is a gray, small diameter cable. Could this have anything to do with the new Raystar antenna I mentioned earlier? I can send a photo of it if that would help.
Find all posts by this user
Quote this message in a reply
05-21-16, 12:35 PM (This post was last modified: 05-25-16 03:48 PM by Chuck - Raymarine - Moderator.)
Post: #13
michaellutz Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
I think I know what the small gray cable going into this port is. Might it be the ethernet connection to my PC running RNS?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication