Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Transferring MFD Waypoints

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transferring MFD Waypoints
04-23-19, 11:59 AM (This post was last modified: 04-23-19 03:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
jthudson26 Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2018
Reputation: 0
[CA11] Transferring MFD Waypoints
I recently purchased & upgraded to (2) Axiom Pro 12 MFD's, which are replacing (2) E-120 classic MFD's. How would I go about converting the data waypoints from our old E-120's to the new Axiom Pro 12's?

I recently upgraded another boat which we installed a e165 MFD which replaced a C140w MFD & was unable to do the data transfer because the data file extensions were a different format. Hoping there is an easy fix for this now possibly.

Thanks,
Tyler Hudson
Find all posts by this user
Quote this message in a reply
04-23-19, 03:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Transferring MFD Waypoints
Welcome to the Raymarine Forum Tyler,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication