Raymarine forum / Raymarine Forums / Autopilots v / St4000 plus with Wireless wind

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
St4000 plus with Wireless wind
05-22-16, 09:43 PM
Post: #1
GregRJohnson Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
St4000 plus with Wireless wind
I have an ST4000 plus autopilot, and a Micronet wireless wind instrument. Is there a way to feed the wind information to the autopilot so I can hold a wind angle with the AP?

Greg
Find all posts by this user
Quote this message in a reply
05-27-16, 12:11 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: St4000 plus with Wireless wind
Welcome to the Raymarine Forum Greg,

The ST4000+ featured a NMEA 0183 communications interface permitting it to be interfaced to a NMEA 0183 source of wind data. Should a T122 Wireless Interface be wired the NMEA 0183 input terminals of the ST4000+, then the Micronet wind data may the be used by the autopilot.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication