Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] UAV remote - MFD connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] UAV remote - MFD connection
06-03-19, 08:07 AM (This post was last modified: 06-04-19 12:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
ddfour1 Offline
Zamboati
***
 		Posts: 66
Joined: Feb 2016
Reputation: 0
[CA11] UAV remote - MFD connection
Does the UAV remote need to remain connected to the MFD via a USB A to USB Micro B cable at all times when the UAV is in use, or is this connection just required at initial setup of the UAV and app?

Thanks

Dave
Find all posts by this user
Quote this message in a reply
06-04-19, 12:58 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] UAV remote - MFD connection
Welcome back to the Raymarine Forum Dave,

The USB cable for the UAV's remote control unit must remain connected to the MFD's USB socket at all times while the Axiom UAV feature is in use.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication