Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] RV 100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RV 100
06-25-19, 04:16 PM (This post was last modified: 06-26-19 03:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
Cagillis70 Offline
Junior Member
**
 		Posts: 10
Joined: May 2017
Reputation: 1
[CA11] RV 100
My xducer got pulled off the trans one while underway and had an encounter with the prop. The rubber outer jacket is pretty chewed up but it appears that the xducer is still functional. Question is, can I cut the chewed up pieces off and maybe fill the voids with silicone caulk? I know it probably won’t be great at speed but it never was that great to begin with. Thanks


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
06-26-19, 03:17 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] RV 100
Welcome to the Raymarine Forum Cagillis70,

I would not recommend repairing the transducer and would recommend replacing it, lest internal shorting potentially cause damage to the MFD's fishfinder circuitry.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication