Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Update
07-22-19, 10:26 PM (This post was last modified: 07-29-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
iRondo Offline
Junior Member
**
 		Posts: 12
Joined: Jan 2018
Reputation: 0
[CA11] Axiom Update
I've been trying to update my Axiom and at the end of the longest archive extraction I've ever witnessed I get this error msg
"Unable to finish expanding “Axiom_v3.9_GPL_Sources.tar.bz2” into “NO NAME”.
Could not move “.BAH.M3srR” into"

I've downloaded and tried to expand the archive twice with both times yielding the same results.

The mSD I'm using is formatted to FAT32 and is 32GB capacity.

Thanks
Find all posts by this user
Quote this message in a reply
07-29-19, 12:21 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Update
Welcome to the Raymarine Forum iRondo,

Was the reported message displayed by the MFD during the software update or when extracting the contents of the compressed folder to the microSD memory card. Were you attempting to update the software of the MFD in which the microSD memory card had been inserted or one of the other networked MFDs within the system?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication