Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Connector specifications available?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connector specifications available?
08-18-19, 05:36 PM (This post was last modified: 08-23-19 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
dacpdx Offline
Junior Member
**
 		Posts: 2
Joined: Jul 2018
Reputation: 0
[CA11] Connector specifications available?
Is it possible to buy bare connectors for mating to Raymarine products if I am interested in making my own cables? for instance the CP370 Transducer connector. Is it a standard connector that could be bought for example from Digi-key or Mouser Electronics and is the specification made available by Raymarine?

I have looked through the site and forums and so far not had any luck finding this information...
Find all posts by this user
Quote this message in a reply
08-23-19, 03:39 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Connector specifications available?
Welcome to the Raymarine Forum dacpdx,

Raymarine neither offers, nor has specified the make/model of transducer plug for the CP370. Airmar, Inc. produces the transducers which are designed for use with the CP370 a well as the fishfinding products of many other marine electronics manufacturers. Extreme care should be taken and Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) should be contacted for compatibility, transducer plug, and wiring information.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication