[CA] [CA11] DSM 30 to A series a127/128

[Teamsouthbound]

I currently have a C90W MFD and switching to a a128 MFD. I have a DSM 30 currently installed with a transducer. My question is will the dsm 30 work on the a128 and if so will the current plug work on the a128 or will I need a different plug or adapter for the dsm 30 to work?

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Teamsouthbound,

Q1. will the dsm 30 work on the a128
A1. Yes

Q2. If so will the current plug work on the a128 or will I need a different plug or adapter for the dsm 30 to work?
A2. No changes to the DSM's connections need take place. Simply unplug the SeaTalkhs cable from the MFD's SeaTalkhs port, connect an A80160 RayNet (F) to SThs (F) Socket Adapter Cable to the SeaTalkhs Cable's plug, and then plug the other end this adapter into the a127/a128 MFD's Ethernet Network (RayNet) socket.

[Teamsouthbound]

Thank you

[Chuck - Raymarine - Moderator]

You're welcome.