Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] new Axion pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] new Axion pro
11-13-19, 01:21 PM (This post was last modified: 11-13-19 01:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
PaulB Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
[CA11] new Axion pro
I have st60 instrument s2 smart pilot computer they talk to a c80 which is to be replaced with an Axion pro 9. I use NMEA 183 into a computer then sent to c80 which also has sea take for the GPS, will there be a problem with the internal GPS if I put NMEA and sea talk into the new unit?
Find all posts by this user
Quote this message in a reply
11-13-19, 02:32 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] new Axion pro
Welcome to the Raymarine Forum Paul,

Please click here to view a FAQ addressing this subject. Axiom/Axiom Pro/Axiom XL MFDs support data source selection, permitting the operator to select the GPS data source which will be used by the system. Please refer to the referenced FAQ regarding how devices which had been interfaced via SeaTalk or NMEA 0183 communications will be interfaced to the Axiom Pro MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication