Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RV-212 Transducers
11-17-19, 03:00 PM (This post was last modified: 11-18-19 01:52 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RV-212 Transducers
I am going to be installing RV-212 transducers in my 1992 Bayliner 3288. It has a 6 degree deadrise and a keel that is about 6 to 8 inches deep and 2 inches wide. How close can the transducers be to the keel. I'm installing with an Axiom RV NAG.
Find all posts by this user
Quote this message in a reply
11-18-19, 03:11 PM
Post: #2
RE: [CA11] RV-212 Transducers
Welcome to the Raymarine Forum Robert,

While you should be alright if the transducers were installed 12" from the keel, we would feel a bit more comfortable in recommending that the transducers be installed 18" from the keel.
Find all posts by this user
Quote this message in a reply
11-20-19, 02:40 AM (This post was last modified: 11-20-19 08:46 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] RV-212 Transducers
Thanks, that helps a lot. Now I know where to look between stringers on the inside and trailer bunks on the outside.
Bob
Find all posts by this user
Quote this message in a reply
11-20-19, 08:47 AM
Post: #4
RE: [CA11] RV-212 Transducers
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)