[LW] [LW11] Deviation windtransducer T120

[Heuz]

I have a Tacktick T120 wind speed and direction transducer. The transducer is only showing two directions (13 o to starboard and 167 o degrees to port) when I rotate the wind vane through 360o. The PCB has been measured and seems o.k.

[Louise - Raymarine - Moderator]

Dear Heuz,

Thank you for your post.

Can you confirm the only angles you see on your tacktick display from the wind transducer are 13' SB and 167' P when turning the windvane a full 360'?

If this is the case I recommend sending the unit for testing and investigation, this can be booked in via our website here.

Many Thanks
Louise

[Heuz]

(12-06-19 08:32 AM)Louise - Raymarine - Moderator Wrote:  Dear Heuz,

Thank you for your post.

Can you confirm the only angles you see on your tacktick display from the wind transducer are 13' SB and 167' P when turning the windvane a full 360'?

If this is the case I recommend sending the unit for testing and investigation, this can be booked in via our website here.

Many Thanks
Louise

Dear Louise,

Thank you for your quick reply. This is exactly what happens. I will send the unit.

Kind regards,

Jon (Heuz)

[Louise - Raymarine - Moderator]

You are welcome.