Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Axiom and Element together

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom and Element together
12-15-19, 07:35 PM (This post was last modified: 12-16-19 04:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
Schins Offline
Junior Member
**
 		Posts: 4
Joined: Dec 2019
Reputation: 0
[CA11] Axiom and Element together
Hello, another question:
I already own an Element hv and was considering adding an Axiom rv to run alongside it. Will there be interference if I run the Axiom at 350khz and the Element at 1200khz?
Find all posts by this user
Quote this message in a reply
12-16-19, 04:18 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom and Element together
Welcome to the Raymarine Forum Schins,

As these fishfinding products operate at different frequencies (350kHz vs 1.2MHz), one should correspondingly not expect any significant interference between a RealVision fishfinder and an Element fishfinder operating on the same vessel.
Find all posts by this user
Quote this message in a reply
12-17-19, 10:04 AM
Post: #3
Schins Offline
Junior Member
**
 		Posts: 4
Joined: Dec 2019
Reputation: 0
RE: [CA11] Axiom and Element together
Great.
Thank you.
Find all posts by this user
Quote this message in a reply
12-17-19, 10:14 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom and Element together
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication