Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Problem importing backup file.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Problem importing backup file.
01-21-20, 03:31 PM (This post was last modified: 01-22-20 11:53 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 7
Joined: Jan 2020
Reputation: 0
[CA11] Problem importing backup file.
Hello,

I have upgrade from LH II 19.03 to LH III 3.11.42.
After upgrade I have problem importing my backup file.

The backupfile made before upgrade is:
Syslogs_E70285-1150591_2020-01-16_130335.tar.gz

What’s wrong? Do I have to convert it to gpx?

Best Regards
Thomas
Find all posts by this user
Quote this message in a reply
01-22-20, 11:58 AM (This post was last modified: 01-22-20 11:59 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Problem importing backup file.
Welcome to the Raymarine Forum Thomas,

Within a MFD running the latest LightHouse II software, saving all waypoint, route, and track data is accomplished via the command sequence HOME->MY DATA->IMPORT/EXPORT->SAVE DATA->SAVE ALL. When followed through to completion, a GPX file (i.e. file having a .gpx file extension) will be produced. The resulting GPX file may be imported into any MFD running the latest LightHouse 3 or LightHoure II software. The file name which you have listed is a compressed file containing system error logs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication