[CA] [CA11] AutoPilot operation in Middle of a Route

[bobby.rees]

When following a route and you are in the middle, is it better to "Start" from the My Data Menus?

Issue:

When you select the Route to follow and you want to reverse the Waypoint Order, you "Follow Route" the first waypoint is at the very end.

Then you have to "Advance Waypoint" to get the next Waypoint to head towards.

Alot of Screen taps to get back to what you want to do.

What am I doing wrong?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Bobby,

What make / model of MFD / Chartplotter has the autopilot been interfaced to?

[bobby.rees]

I have two (2) a78 MFD. Both Bluetooth. One is WiFi. That is configured as my "Master". I have just installed and commissioned myself the Autopilot by Ray Marine. I have been able to "Connect" my Apple iPad and Samsung Galaxy 9+ and connect to the WiFi A78 MFD.

Original Question:
===========

I have read "Determining a route's sequence following a succession of REVERSE commands" and that explains part of my confusion.
Now...In the middle of a route
1. Do I go to My Data and select Route, then REverse, then pick next waypoint as "Follow From Here"

2. When I select "Follow" it jumps to the last waypoint in the list???
Not the one I just asked it to follow.

3. When attempting to perform this task, Do I
Menu-Navigate-route
or
Menu-My Data-Route

Note: With WiFi A78 I upgraded to lates Lighhouse II Software = 19
last Saturday, 02-22-02
Pretty Cool.
Thanks for your support.
I am a Mechanical Electrical Engineer and a Licensed Captain USCG.
I am a Gaget Man and want to meet the "Chalenges" that they Ray Marine Engineers have designed into these Systems.
I also have Quantom Radar, and Downvision Sonar.
Just purchase: 07-2019
2005 Wellcraft 290 Coastal w/ (2) 225 HP Yamaha - 4 Stks
Thanks again

[Chuck - Raymarine - Moderator]

Bobby,

Please click here to view a FAQ addressing this subject. I believe that you will find that it addresses all points of following a route.