Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] What can I replace an S1 Pilot computer with?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] What can I replace an S1 Pilot computer with?
03-13-20, 08:36 AM
Post: #11
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] What can I replace an S1 Pilot computer with?
gerard,

The model of autopilot course computer to be installed is dictated by the model of autopilot drive unit which has been installed on the boat. As Derek had previously indicated the X5 is not designed for use within a Type 1 Hydraulic Pump, in that it is not designed to support the current/power demands of a Type 1 Hydraulic Pump. If seeking a second hand legacy autopilot course computer to replace your failed S1 course computer, then an S1, S1G, S2, S2G, S3, S3G, X10, or X30 should be sought.
Find all posts by this user
Quote this message in a reply
03-13-20, 09:02 AM (This post was last modified: 03-13-20 09:22 AM by Chuck - Raymarine - Moderator.)
Post: #12
gerard Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2020
Reputation: 0
RE: [CA11] What can I replace an S1 Pilot computer with?
OK. Many thanks.
Find all posts by this user
Quote this message in a reply
03-13-20, 09:21 AM
Post: #13
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] What can I replace an S1 Pilot computer with?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication