Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] E7D MFD - Sonar issue
03-16-20, 04:39 AM (This post was last modified: 03-16-20 03:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] E7D MFD - Sonar issue
Hi folks,
new second hand boat, and cant get a good sonar reading to detect bottom hardness. Somehting is clearly worng, and I have tried multiple settings, software update and factory reset. transducer? Here is a video on the output I get, hoping someone might have some clues??

https://youtu.be/bzHLKx0RPR4

Thanks
Find all posts by this user
Quote this message in a reply
03-22-20, 06:30 PM
Post: #2
RE: [TG11] E7D MFD - Sonar issue
Hello Robboa,

That's exactly what we'd expect to see if there was no discernible bottom echo at all, for example from an in-hull transducer where the wet-box has leaked, or a transom-mount transducer with the boat on the trailer.

What sort of transducer do you have?
What approximate depth of water were you in at the time of the video?

For background information and diagnosis steps, please read http://forum.raymarine.com/showthread.php?tid=9371

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)