Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Saved Route Filename error?
03-17-20, 12:25 AM (This post was last modified: 03-18-20 11:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Saved Route Filename error?
I have an AXIOM Pro 16 running LH3 version 3.11.42.

I have been having trouble saving individual routes. I can save all routes and some individual routes.
BUT I have one route called "Outward" and another called Out-Bribie-Moreton.

When I exported these last 2 to a 32g SD card looked at them with a text editor on my PC either the Out-Bribie-Moreton.GPX or the Outward.GPX one would be corrupt.
I deleted them and exported the same files from my Axiom. I suspect whichever of the 2 files I exported last corrupted the other.

I scanned the 32g card using windows and it found one was cross linked.
I already had copies of all the other files on the card (mainly PDF files), so I did a FULL format using windows (NTFS file system).

I copied the PDF files back but not the individual GPX files.
I exported the routes from the axiom and the "Outward.GPX file was OK "Out-Bribie-Moreton.GPX was listed but not readable (windows reported "file not found".) I deleted the file as well as the Outward.GPX file

I again exported the routes from the axiom but this time I renamed the file "Out-Bribie-Moreton" to "OutBribieMORETON"

It may be pure coincidence but I think the two "-" in the file name caused something. The saved routes containing all the routes have 1,2 or 3 "_" in the file name

I think the google wiki for Android says not to use "_" in file names but it is only an advisory for readability. It seems to indicate that "-" is acceptable.

I was very careful to eject the card each time before removing it from both Axiom Pro & Windows.
Find all posts by this user
Quote this message in a reply
03-24-20, 01:18 AM
Post: #2
RE: [TG11] Saved Route Filename error?
Hello BernieK,

Thanks for reporting this. I've not come across - or would expect - any limitations on either of those formats of filenames or route names, both hyphens and underscores, and I haven't been able to replicate any problems in a quick trial here. If you'd like to send me an archive of data that triggers the problem I'd be happy to have a look.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
03-26-20, 09:54 PM (This post was last modified: 03-27-20 05:36 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] Saved Route Filename error?
Tom
Thanks for the quick reply.
Please find attached the complete archive. Unfortunately, I didn't save the faulty files.
Stay well
cheers
Bernie
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)