[CA11] 3rd Party IP Cam

[unixdood]

Hi Chuck,
I know you don't really support 3rd party IP cameras but i am trying to see if there may be an issue with my MFD.

I have an Axiom 9rv (Latest Lighthouse III) with the Raymarine Ethernet switch and a 3rd party IP camera. The camera is set for no authentication for RTSP AND no authentication for ONVIF. I get the display image from the camera on the Axiom for 1 second then it goes away for 10 seconds, then comes back for 1 second and goes away for 10 seconds and this repeats. Is this a scroll setting or is this an issue with the port for ONVIF? What port is used for ONVIF for Raymarine IP Cameras?
Thanks
Bill

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Bill,

The member of our team responsible to addressing camera related issues could only provide the following information on this subject: Raymarine products do not support ONVIF, nor do they support authentication. Axiom is a video monitoring system, not a video security system. Potentially, if you can set the camera to no authentication / no password requirement, then you may get the third party IP camera to work. Unfortunately, other the FAQ addressing this subject, this is the only additional information which may be provided.

[unixdood]

Thanks for the reply Chuck. I thought in reading the other posts, Raymarine DOES support ONVIF. Either way I appreciate the replay.

[Chuck - Raymarine - Moderator]

You're welcome.