Upgrading from a C80 to C95

[DennisGa1]

Hello, I'm new to this forum and not savvy when it comes to installing chart plotters.

I have a 2009 Sea Ray Sundancer with Raymarine C80 chart plotter, Raymarine VHF and Autopilot.

I purchased a Raymarine C95 and had Raymarine go through it last year and I want to replace my C80. What do I need to connect to the things it's supposed to connect to?

Any advice would be greatly appreciated.

Thank you,
Dennis

[Chris - Raymarine - Moderator]

Hello ,

Please see the attached installation guide for the C80-c95 adapter template(R70010). This adapter allows you use the existing cut out to mount your c95 without having to do dashwork. This will take care of the mounting.
The next step will be to remove the C80 power cable and replace it with the power cable included with the c95.
If you have a NMEA0183 device connected to the C80 the new NMEA0183 connections are on the power cable. The new NMEA0183 connections on the c95 have the exact same color combination as the C80. It is a simple as removing the old and connecting to the new connection color for color.
You will also want to order the E22158 Seatalk to STNG adapter to adapter over the existing Seatalk equipment on the boat.

The c-series installation guide, Seatalk to STNG converter guide and all of our manuals can be found at this link for more information, https://www.raymarine.com/service-and-su...documents/

Chris,