Raymarine forum / Raymarine Forums / Radar v / cut cable

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cut cable
06-25-16, 10:06 AM
Post: #1
jim35 Offline
Junior Member
**
 		Posts: 18
Joined: May 2016
Reputation: 0
cut cable
I just purchased a used m92654s open array but the cable was cut removing it. I don't need the length so can I just use it shorter or does it have to be a certain length. Thanks , Jim
Find all posts by this user
Quote this message in a reply
06-30-16, 10:36 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: cut cable
Welcome to the Raymarine Forum Jim,

You can indeed shorten radar cables designed for use with m92654s. When splicing the cable back together, care must be taken to keep the leads as short as is permissible and to ensure that all leads and the shield are included within the splice.
Find all posts by this user
Quote this message in a reply
07-02-16, 06:57 AM
Post: #3
jim35 Offline
Junior Member
**
 		Posts: 18
Joined: May 2016
Reputation: 0
RE: cut cable
Chuck , thanks for the info . Jim
Find all posts by this user
Quote this message in a reply
07-05-16, 09:26 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: cut cable
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication