Threaded Mode | Linear Mode

Humper · 07-26-16, 06:23 AM

Hi. I have a C90W on my sailboat connected to SH 2150. Both were installed new 4 years ago. Recently I have noticed something strange. When the plotter is zoomed in...say to 1/4 mile range....the AIS targets disappear. I still get the "dangerous target" alarms and screen pop up, but no AIS info. If I zoom out, everything is normal. This never used to happen. Any ideas?

***Chuck - Raymarine - Moderator*** · 07-26-16, 09:03 AM

Welcome to the Raymarine Forum Humper,

Please click here to view a FAQ addressing how to determine the version of software which is installed within your MFD. What version of software is installed within your MFD? When the reported issue occurs and the AIS Target List is examined, what is the range of the closest target?

Humper · 07-26-16, 04:29 PM

Software version on the C90W is 2.35

***Chuck - Raymarine - Moderator*** · 07-26-16, 04:37 PM

Humper,

When the reported issue occurs and the AIS Target List is examined, what is the range of the closest target?

Humper · 07-27-16, 07:32 AM

Hi
I will confirm that on next visit to boat.

***Chuck - Raymarine - Moderator*** · 07-27-16, 08:05 AM

Noted.