DST800 with iTC-5 and e7D no speed
|
08-02-16, 01:01 PM
Post: #1
|
|||
|
|||
DST800 with iTC-5 and e7D no speed
Hello,
I really hope you can help me with my problem. I have Raymarine e7D MFD I add to it DST800 for Depth/Temp/Speed via iTC-5 converter, power is connected to iTC-5 from battery and iTC-5 to e7D via SeaTalk NG Backbone Cable and SeaTalk NG T Piece. You will find diagram in my post. Depth and temp are showing on my e7D, but no speed. Please advice. |
|||
08-02-16, 01:30 PM
Post: #2
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
Hello antyukhin,
What is the software version you are running on the e7D? From the home screen, setup--->maintenance--->diagnostics--->select device If you are not running the latest version of V17.45 I would upgrade first and then try setting the data source. If you are running the latest software, try selecting the data source for speed. From the home screen, system settings--->data sources--->speed--->select "ITC-5" |
|||
08-02-16, 03:42 PM
Post: #3
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
Hello Mark,
I think I have old software version. Last time I update it year ago. Will upgrade it and let you know results. Thank you! |
|||
08-03-16, 01:43 PM
Post: #4
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
Hello,
I did the update to the latest version. Same problem, no speed, but temperature and depth are good. In settings of speed, it did find iTC-5 and it is selected. iTC-5 have a steady green light, no problem found. Please advise. |
|||
08-04-16, 02:21 PM
Post: #5
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
Okay, on the iTC-5 if you remove the green wire from the speed temp connection, and then power up the system, what does the speed box display?
3 dashes --- or zero 0.0? When you say your temp is good, is it reading correctly? Is the DST800 your only transducer source for temp? What is model number of the DST800? |
|||
08-08-16, 05:44 PM
Post: #6
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
After disconecting green cable from speed/temp display shows 0.0kts.
Temperature I'm comparing to my neighbor boat data. Dts800 is the only data source in my setup. DST800 A22154 35-002-4-01 18-375-297 rev 01 |
|||
08-08-16, 07:09 PM
Post: #7
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
I also tried to rus system with no power to itc-5, and then it shows -.-
But with power it shows 0.0 |
|||
08-09-16, 08:22 AM
(This post was last modified: 08-09-16 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #8
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
antyukhin,
Does the system include an i70s / i70 Multifunction Instrument Display? |
|||
08-09-16, 09:08 AM
Post: #9
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
Hello,
no, there is no i70 display, do I need to have one? As I understand from description of e7D it supposed to be compatible to show all necessary data via iTC-5. |
|||
08-09-16, 10:18 AM
(This post was last modified: 08-09-16 11:49 AM by Chuck - Raymarine - Moderator.)
Post: #10
|
|||
|
|||
RE: DST800 with iTC-5 and e7D no speed
antyukhin,
It is indeed necessary for the system to include an i70s / i70 MFID when it includes an iTC-5. Please click here to view a FAQ addressing this subject. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)