Raymarine forum / Raymarine Forums / Autopilots v / Which Control head is a compatible replacement for the ST 6000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which Control head is a compatible replacement for the ST 6000+
11-30-16, 11:59 AM
Post: #1
Santosha Too Offline
Junior Member
**
 		Posts: 7
Joined: Nov 2016
Reputation: 0
Which Control head is a compatible replacement for the ST 6000+
I have a ST 6000+ that is acting erratically and would like to know if the ST 6001 or ST 6002 are compatible replacements.
Find all posts by this user
Quote this message in a reply
11-30-16, 12:18 PM (This post was last modified: 11-30-16 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Which Control head is a compatible replacement for the ST 6000+
Welcome to the Raymarine Forum Santosha Too,

The ST6000+ autopilot control head may be replaced with any of the retired ST600x (including the ST6001 and ST6002), ST700x, ST800x autopilot control heads. Should you identify the model of autopilot course computer which has been installed onboard, then it may be possible to specify whether the currently manufactured p70s, p70Rs, p70, and p70R autopilot control heads may be used to replace your ST6000+ autopilot control head.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication