Raymarine forum / Raymarine Forums / Marine Cameras v / CAM 220 updated instructions

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAM 220 updated instructions
01-03-17, 10:20 AM
Post: #1
BocaIII Offline
Junior Member
**
 		Posts: 12
Joined: May 2016
Reputation: 0
CAM 220 updated instructions
Trying to connect the CAM220 to a Windows 10 PC.
The instruction book covers using Win 7 which is very different
to Win 10. Are there updated instructions available for Win 10?
Thanks,
Jack
Find all posts by this user
Quote this message in a reply
01-03-17, 04:02 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: CAM 220 updated instructions
Welcome to the Raymarine Forum BocaIII,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
01-03-17, 04:16 PM (This post was last modified: 01-03-17 04:32 PM by Chuck - Raymarine - Moderator.)
Post: #3
BocaIII Offline
Junior Member
**
 		Posts: 12
Joined: May 2016
Reputation: 0
RE: CAM 220 updated instructions
I did find IE and used ip http://192.168.1.100 ... still will not connect
Find all posts by this user
Quote this message in a reply
01-03-17, 04:35 PM (This post was last modified: 01-04-17 08:47 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: CAM 220 updated instructions
BOCAIII,

Did you use the IPScan Utility to determine the camera's IP address? If so, and the address is as specified, then is your PC's network interface (Internet Protocol v4) configured for DHCP (i.e. to obtain an IP address automatically)?
Find all posts by this user
Quote this message in a reply
01-04-17, 06:57 AM (This post was last modified: 01-04-17 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #5
BocaIII Offline
Junior Member
**
 		Posts: 12
Joined: May 2016
Reputation: 0
RE: CAM 220 updated instructions
Yes, PC configured as described
Find all posts by this user
Quote this message in a reply
01-04-17, 08:53 AM (This post was last modified: 01-04-17 10:03 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: CAM 220 updated instructions
BocaIII,

There is either something wrong with your camera or something incorrect in interfaced the camera to the PC or how you have configured your PC's network interface. Whereas your responses to the questions which I have asked are all consistent with a correctly configured system, it is recommended that our support team be contacted at 603.324.7900 to discuss and walk your through the process of accessing the CAM220IP's web page again while you have a powered CAM220IP and PC in your presence.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication