Raymarine forum / Raymarine Forums / Multifunction Displays v / Displaying battery voltage within a Raymarine MFD or i70/i70S MFID

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Displaying battery voltage within a Raymarine MFD or i70/i70S MFID
02-22-17, 03:04 PM (This post was last modified: 02-22-17 03:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Displaying battery voltage within a Raymarine MFD or i70/i70S MFID
Displaying battery voltage within a Raymarine MFD or i70/i70S MFID

Please note that engine systems typically report alternator output voltage, not battery voltage. Raymarine's a/c/e/eS/gS-Series MFDs are designed to exclusively support reporting battery voltage from a battery monitoring device supporting NMEA 2000 communications protocol (ex. Maretron DCM 100, Actisense EMU-1, etc.) transmitting NMEA 2000 PGN 12750 (Battery Status). Raymarine's a/c/e/eS/gS-Series MFDs are designed to report supply voltage within the MFD's diagnostic features (H0ME->SET-UP->MAINTENANCE->SELECT DEVICE->Select the MFD of interest from the displayed Devices list). A feature request has been submitted to consider that that MFDs and i70 MFIDs report supply voltage within the Battery 1 Voltage Data item when PGN 12750 is not present on the SeaTalkng / NMEA 2000 backbone.

Please click here more information concerning product and feature suggestions..

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication