Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA11] tracks

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] tracks
05-19-18, 01:33 PM (This post was last modified: 05-22-18 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
boatman2 Offline
Junior Member
**
 		Posts: 15
Joined: Sep 2017
Reputation: 0
[CA11] tracks
I have two Axiom 9. how do I change my tracks to follow me like I'm going instead of straight lines with sharp angles ?
Find all posts by this user
Quote this message in a reply
05-22-18, 09:11 AM (This post was last modified: 05-22-18 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] tracks
Welcome to the Raymarine Forum boatman2,

Like all Raymarine MFDs which have been produced, MFDs running LightHouse 3 software may be configured to create track points at automatically determined spacing (AUTO), based upon a time interval specified by the operator (TIME), or based upon a distance interval specified by the operator (DISTANCE). Detailed instructions for configuring the track point interval may be found within 7.3 Tracks of the LightHouse 3.4 Advanced Operation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication