Raymarine forum / Raymarine Forums / Radar v / Radar cable resistance test

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar cable resistance test
04-20-17, 08:35 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Radar cable resistance test
iimatias,

E92142 is the part number for a RD418HD radome and T70168 is the part number for a RD418HD radome packed with a 10m Digital Radar Cable. A Digital Radar Cable will be required to interface the MFD to the Radome, as the currently installed radar cable is not compatible with Raymarine radar products having an Ethernet communications interface. Should the MFD's Ethernet (SeaTalkhs) port not presently have any cable interfaced to it, then the Digital Radar Cable may be adapted to be mated to it's Ethernet port by using an A80272 RayNet (M) to SeaTalkhs (M) Adapter Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Radar cable resistance test - iimatias - 04-19-17, 10:28 AM
RE: Radar cable resistance test - Chuck - Raymarine - Moderator - 04-20-17 08:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication