Quantum radar data cable length

[Chuck - Raymarine - Moderator]

Hcfirstlight,

Raymarine does not offer Quantum Data Extension Cables. Should the extension be installed below decks, then a Quantum Data Cable may simply be extended with a RayNet (M) to RayNet (M) Cable Joiner and an appropriate length or RayNet (F) to RayNet (F) Cable. The Quantum Data Cable is primarily applicable to installations where an existing radar cable will be used to supply power to the Quantum Radome. For new Quantum Radome installations where communications will be carried via cable, it is recommended that the Quantum Radome be purchased without a Data cable and that a Digital Radar Cable (single cable supplies power and Ethernet communications) be chased between the radome and the MFD or HS5 RayNet Network Switch. In this way only one cable need be chased to the Quantom Radome. An A80308 Quantum Adapter would then be used to adapt the Digital Radar Cable to be mated to the Quantum Radome's pwoer and Ethernet sockets. Please click here to view a FAQ addressing this subject.