Type I pump install ev150

[Chuck - Raymarine - Moderator]

rltrbill,

Q1. I want to make sure it is done the right way. Should I simply connect a hose from either of the "R" ports on the helm to the "R" port on the RM motor?
A1. Yes.

Q2. As far as pump location- it is a smaller powerboat (26 Pursuit/twin 200 outboards) and under the helm, below the seastar helm is by far the most practical as long as it will function properly.
A2. Again, installing the pump at the helm should be satisfactory as long as the previously supplied information concerning the height of the autopilot pump relative to helm pump and protection of the autopilot pump from the marine environment are adhered to.