Raymarine forum / Raymarine Forums / Autopilots v / rudder limit, set uup issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rudder limit, set uup issue
05-01-17, 12:40 PM (This post was last modified: 05-01-17 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #5
eric1528 Offline
Junior Member
**
 		Posts: 28
Joined: Mar 2016
Reputation: 0
RE: rudder limit, set uup issue
Unfortunately I would need some more info to test than red to green and a ohm reading, I will research how to test ohms when I get moment. Based on some research about other evo200 installs it is necessary to have the rudder reference transducer installed. I believe it was used because the other ray autopilot I believe a ST1000 had it installed. Can I just take it loose from the acu and use it without it....?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
rudder limit, set uup issue - eric1528 - 04-27-17, 10:10 AM
RE: rudder limit, set uup issue - eric1528 - 05-01-17 12:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication