Raymarine forum / Raymarine Forums / Autopilots v / rudder limit, set uup issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rudder limit, set uup issue
05-01-17, 08:17 PM (This post was last modified: 05-02-17 08:44 AM by Chuck - Raymarine - Moderator.)
Post: #11
eric1528 Offline
Junior Member
**
 		Posts: 28
Joined: Mar 2016
Reputation: 0
RE: rudder limit, set uup issue
Did some of the tests tonight and the readings were all over the place. First test with red and green was a .7 but was still moving. The blue and red the number kept moving without the transducer moving. I hooked the unit back up and originally read 11 degrees to starboard with motors center and transducer centered. I ran the dockside wizard and the transducer failed task. After dockside wizard the transducer was off the scale to starboard with motors centered again so the transducer is changing its readings during the test.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
rudder limit, set uup issue - eric1528 - 04-27-17, 10:10 AM
RE: rudder limit, set uup issue - eric1528 - 05-01-17 08:17 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication