RL80C upgrade to axiom

[Chuck - Raymarine - Moderator]

Joe,

Q1. Raytheon Type 100
A1. It is not recommended that Type 100 autopilot course computers be used with a SeaTalk to SeaTalkng Converter. This leaves the autopilot's NMEA 0183 communications interface as that through which the MFD will communicate. As Axiom MFDs do not feature a NMEA 0183 communications interface, a SeaTalkng / NMEA 2000 to NMEA 0183 data bridging device will need to be installed between the new system's SeaTalkng backbone and the NMEA 0183 input port or the autopilot's course computer. The MFD's Autopilot Controls feature is not supported for autopilots which have been interfaced via NMEA 0183 communications protocol to the Raymarine system. However, this interface will support supplying the autopilot with navigational data to support use of the autopilot's Track mode feature. Track mode need simply be engaged via the autopilot's control head.

Q2. Do I need a special adapter to connect the old transducer to the axiom?
A2. Yes. An A80489 Adapter Cable would be used to adapt the L760's transducer alone to an Axiom RV MFD. An A80492 Adapter Y-Cable would be used to adapt the L760's transducer along with a RealVision Transducer to an Axiom RV MFD.

Q3. Also, regarding the Axiom, am I able to plug in an external gps antenna? I have a hard top and would like to use my existing one if possible.
A3. Please respond with the make and model of GPS sensor which is presently installed onboard.

Q4. What kind of mounting bracket do I need for the radar? Is there anything else I need to order? I just want to be sure I buy everything I need for the installer.
A4. Please click here to view a FAQ addressing this subject.