The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Adding Axiom or a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFD

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding Axiom or a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFD
01-13-16, 09:24 AM (This post was last modified: 02-07-20 01:25 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Adding Axiom or a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFD
Adding Axiom or a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFDs

Unfortunately, E-Series Classic MFDs (E80, E120) may not be interfaced to an Ethernet (SeaTalkhs/RayNet) network which also features Axiom/Axiom Pro/Axiom XL MFD(s) or a/c/e/eS/gS-Series MFD(s) (note the difference in the case of the letters used within these model names). While it is possible to interface the Axiom/Axiom Pro/Axiom XL MFD(s) or a/c/e/eS/gS-Series MFD(s) to a common SeaTalkng backbone to which the E-Series Classic MFDs have also been interfaced, communications would be limited to alphanumeric, GPS, instrument, navigational, and system status data between these systems. Correspondingly, it is not possible for E-Series Classic MFDs to share graphical data such as cartography, radar, fishfinder, or Sirius Marine Weather with Axiom/Axiom Pro/Axiom XL MFD(s) or a/c/e/eS/gS-Series MFD(s).

Should full functionality dual station or multi-station capability be desired, then it would be necessary to replace the E-Series Classic MFDs with a complete suite of Axiom/Axiom Pro/Axiom XL MFDs or a/c/e/eS/gS-Series MFDs. Any combination Axiom/Axiom Pro/Axiom XL MFDs may be installed within a network of Axiom/Axiom Pro/Axiom XL MFDs. Any combination a/c/e/eS/gS-Series MFDs may be installed within a network of a/c/e/eS/gS-Series MFDs.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Adding Axiom or a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFD - Chuck - Raymarine - Moderator - 01-13-16 09:24 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication