The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / Wi-Fish stuck in Simulator mode

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wi-Fish stuck in Simulator mode
05-04-17, 02:56 PM (This post was last modified: 05-04-17 03:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Wi-Fish stuck in Simulator mode
Wi-Fish stuck in Simulator mode

Wi-Fish will operate in Simulator mode when it is being powered and does not detect that a transducer has been interfaced to the product. This situation is commonly encountered when customers interface a power/transducer extension cable alone to the product to permit familiarization with the product's features at while home. Should a transducer be connected to a Wi-Fish and the product operate in Simulator mode rather than Live mode, then this condition would indicate a problem with the Wi-Fish or transducer. In such cases, it is recommended that the Wi-Fish/Display and its transducer be sent to Raymarine’s Product Repair Center to be bench checked / serviced.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Wi-Fish stuck in Simulator mode - Chuck - Raymarine - Moderator - 05-04-17 02:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication