Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST60 wind, tested voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 wind, tested voltage
05-05-17, 01:10 PM (This post was last modified: 12-06-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST60 wind, tested voltage
Jim,

Please click here to view a FAQ addressing this subject. This FAQ calls for performing three voltage measurements. As you have suggested, should any of the measured voltages deviate from those specified within FAQ (they do in the case of your wind transducer), then it would indicate a fault within the transducer, necessitating that the wind instrument be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60 wind, tested voltage - Chuck - Raymarine - Moderator - 05-05-17 01:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication