No Pilot error message on P70

[Chuck - Raymarine - Moderator]

daknecht,

Q1. "You can't disconnect the ACU-100 because that provides power."
A1. The point which you have raised is incorrect. Neither the ACU-100 nor ACU-150 are designed to supply power to the SeaTalkng / NMEA 2000 backbone. Accordingly, these ACUs may be disconnected from a SeaTalkng / NMEA 2000 backbone without affecting the power state of the SeaTalkng backbone. It is recommended that the procedure provided within my prior response be used to update the software within each of the Evolution autopilot components.