Raymarine forum / Raymarine Forums / Networking / System Integration v / Configuration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Configuration
05-09-17, 02:02 PM (This post was last modified: 05-09-17 02:46 PM by Chuck - Raymarine - Moderator.)
Post: #3
jalexand Offline
Junior Member
**
 		Posts: 13
Joined: Oct 2016
Reputation: 0
RE: Configuration
Ok that's some what confusing on the autopilot as I was told the opposite on the phone today with Technical Support. They suggested that all I need to do was to connect the SeaTalk1 to SeaTalkng at the end of my chain since my ST60's are all powered off the autopilot.

I am somewhat concerned about damaging things now if I don't connect them correctly.

BTW do you know if the Visio stencil is available? It would be much easier to draw this and reference a drawing.

Thanks,
Jason
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Configuration - jalexand - 05-07-17, 07:21 PM
RE: Configuration - jalexand - 05-09-17 02:02 PM
RE: Configuration - jalexand - 05-09-17, 03:03 PM
RE: Configuration - jalexand - 05-09-17, 07:38 PM
RE: Configuration - jalexand - 05-10-17, 10:59 AM
RE: Configuration - jalexand - 05-11-17, 07:00 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication